It's very simple: click on the “Request your quote” button and leave us your contact details. In a few days, Ayvens will call you to answer any questions you may have, provide you with the detailed information you want, and guide you through the contract signing process. All products and services included will be covered by this single contract with Ayvens. Once the contract is signed, Endesa will install the charger and send you the code to activate the discounted rate.

No, you can contract the Endesa Drive product without having a home electricity contract with Endesa. However, if you are already an Endesa customer or contract your electricity with us, we will reward you with an additional 100kWh of public charging per month, as well as allowing you to enjoy the benefits of our electricity products for your home.

When the delivery date of your vehicle approaches, we will send you an email with a code to activate the “Automotive Universal” discount rate. You will need to download the Endesa On Your Way app to your mobile phone and register to enter this code. Once you have registered, or if you are already registered, go to My Account and activate a charging rate. To do this, you must have an active payment method and a previously activated rate. We recommend the E-Flex rate to start with, as there is no activation or periodic cost.Once you have activated your tariff, you can activate your code in the My Account > Promotional Codes > Add Promotional Code section.

If you are already an Endesa customer or sign up for an Endesa electricity rate during the contract period with Ayvens, you will need to send us the contract to automotive@enel.com and we will send you another activation code to activate the “Automotive Bundle” rate, which will allow you to enjoy 200kWh/month at no cost.

Once the monthly bonus amount has been exceeded, the current prices for each recharge shown in the App will be applied prior to recharging for the connector. The bonus kWh basket will be renewed monthly in your App wallet.

Includes everything necessary for a standard charger installation in accordance with applicable regulations, in particular ITC-BT-52, with a limit of 70 meters, max. 5 concrete drills, power balancing, Electrical Installation Certificate (EIC).

Possible adaptations to the installation to provide connectivity to the charging equipment are not included, in the event that the location of the installation does not have mobile or WiFi coverage. If required by the customer, this adaptation will be quoted at the time by the technician and will be installed after acceptance of the additional quote by the customer. Additionally, the following are not included:

• Installation above 70 meters.
• More than 5 concrete slabs.
• Civil works:
• Trenches.
• Drills between floors requiring the use of special drilling tools (concrete drilling machines).
• Channels in brick or walls made of other materials.
• Request for a new electricity supply (in cases where there is no 230/400 VAC supply point equipped with a ground connection, with a general control and protection panel and measuring equipment).
• Installation or modification of meters or internal electrical wiring.
• Electrical work in the home, unrelated to the installation of the equipment defined in the previous section.
• Correction of any defects that may be detected in the Customer's Installation or Equipment during inspections by the Administration, when such defects are due to faulty installation by a company or professional not affiliated with ENDESA and/or any substantial changes made to the installation by the Customer or by applicable regulations.
• Negotiating with the distribution company to increase power when necessary.
• Use of cranes or scaffolding (garages with heights greater than 4m).
• Masonry, plumbing, cosmetic, or painting works.
• If it is not possible to test the connection between the charging equipment and the electric vehicle at the time of installation, and a subsequent visit by the provider is required for this purpose. 
• The payment of any type of administrative fee or charge, project approval and costs associated with legalization before the competent Professional Associations, and any type of tax, approval, surcharge or fee associated with the installation of the Equipment. 
• If the extra work does not affect the installation covered by the Contract (masonry, aesthetics, additional work on the home, etc.) and the Customer gives their consent to the installation being carried out without such extras, the installation will proceed.

To install a charging point for an electric vehicle, there must be a 230/400 VAC supply point equipped with a ground connection, a general control and protection panel, and measuring equipment.

If there is no electricity supply point available, you must request a new one from the electricity distribution company. To do this, you must contact the electricity distribution company responsible for your area.

Each distribution company defines the protocol to be followed. Once the request has been made, the distributor will send you a quote. Normally, no major work will be required to adapt the electrical network, so you will only have to pay the costs of the new connection, which, for a power of 9.2 kW, is around €350 + VAT. However, sometimes it will be necessary for the distribution company to carry out additional work, in which case it will provide a quote and you can decide whether or not to go ahead.

Prior to signing the leasing contract, an installer will visit your premises to verify the technical feasibility of the installation. If it is not feasible, the Endesa Drive product will not be available for purchase, and both Ayvens and Endesa will advise you on finding an alternative solution for your mobility needs.

Law 49/1960, of July 21, on Horizontal Property establishes in Article 17, point 5: ”The installation of an electric vehicle charging point for private use in the building's parking lot, provided that it is located in an individual parking space, will only require prior notification to the community.

The cost of such installation and the corresponding electricity consumption shall be borne entirely by the party or parties directly interested in it. Therefore, it is only necessary to inform the community of owners and/or the administrator that a charging device is going to be installed in the parking space.

If it is necessary to carry out this procedure, Endesa will provide a standard letter.

If the parking space where you are going to park your electric vehicle is rented, you can install a charging device, but you must first request authorization from the owner. It is recommended that the tenant provides written authorization, with their signature, to avoid any problems later on. In addition, this authorization can be attached to the installation notification mentioned above.

If this procedure is necessary, Endesa will provide a standard letter.

If your parking space is under concession and the concessionaire has established a specific protocol for action, you must comply with the provisions of that protocol. This is the case for residents of Madrid city, who have parking spaces under municipal concession, for example.

On the other hand, if the concessionaire has not established a specific protocol for action, it will suffice to inform the concessionaire as established in Article 17, point 5, of Law 49/1960, of July 21, on Horizontal Property.

 If it is necessary to carry out this procedure, Endesa will provide a standard letter.

You can terminate your electricity or gas contract at any time within the legal withdrawal period. To do so, simply complete the withdrawal form and send it through one of the following channels:

• Postal mail: ENDESA ENERGÍA S.A.U. – P.O. Box 818, 08080 Barcelona.
• Email: atencionalcliente@endesaonline.com.

Required documentation:

Please include the following details to ensure your withdrawal request is valid:

• Full name of the contract holder.
• National ID (DNI).
• Supply address.
• CUPS number.
• Bank account associated with the contract.

Endesa Mobility is the perfect opportunity to save on your energy bill by signing up for a combined electricity and Waybox home charger package. And there’s no minimum contract period!

The Endesa Mobility offer consists of 3 packages tailored to you and your needs:

• Single-Family Basic: Includes the charger and everything needed for its standard installation in single-family homes without power balancing, with a limit of 20 metres, max. 1 brick drill hole, Electrical Installation Certificate (CIE), and processing of the Plan Auto Plus 2026 subsidy application.
• Single-Family Plus: Includes the charger and everything needed for its standard installation in single-family homes with power balancing, with a limit of 20 metres, max. 1 brick drill hole, Electrical Installation Certificate (CIE), and processing of the Plan Auto Plus 2026 subsidy application.
• Communal: Includes the charger and everything needed for its standard installation in communal living spaces (apartment buildings) with power balancing, with a limit of 50 metres, max. 1 concrete drill hole, max. 1 brick drill hole, Electrical Installation Certificate (CIE), and processing of the Plan Auto Plus 2026 subsidy application.

All packages include a 3-year warranty and offer an alternative option for three-phase installations.

Find out all about the new Auto+ Plan here: https://www.endesa.com/es/movilidad-electrica/gestion-ayudas-plan-auto-plus.

No, the Recarga en Casa Tariff has no minimum contract period or cancellation fees. You can switch tariffs or cancel your contract whenever you like.

No, with this tariff you’ll pay a charge for the contracted power and a charge for the energy consumed, just as you would with most offers on the market. You’ll also pay a flat fee, which allows you to charge your car for up to 1,250 km per month.

With Endesa Energía’s Recarga en Casa Tariff, for €0.8219/day you’ll be entitled to up to 216.99 kWh for a standard 30-day billing cycle (equivalent to a flat-rate charge of €24.65). Any kWh consumed in each billing cycle that exceeds the amount of energy included in the flat rate will be billed at the energy rate of the "Recarga en Casa Tariff" with any applicable discounts. The kWh included in the flat rate for each billing cycle may not exceed 60% of the total kWh consumed in that cycle, and any amount exceeding that 60% will be billed at the energy rate of the "Recarga en Casa Tariff", with any applicable discounts.

In other words, assuming a 30-day billing cycle with 216.99 kWh included in the flat-rate allowance, your total consumption must be 361.65 kWh for the 60% restriction not to apply. If your total consumption is lower than this figure, any kWh exceeding that 60% will be billed at the energy rate for the Recarga en Casa Tariff.

For information purposes, the total consumption of the kWh included in the flat-rate charge does not guarantee the total consumption associated with charging your vehicle. The consumption data used has been calculated in accordance with IDAE Methodology 19/05/2025, assuming an approximate average consumption of 17.6 kWh per 100 km for an electric vehicle, such that the 216.99 kWh per month would be equivalent to 1,250 km per month or 15,000 km per year.

No, the meter does not distinguish between the energy used to charge the electric car and that used by other electrical appliances. This means that if you do not need as much energy to charge your car, the energy included in your tariff is used to cover household consumption.