If you prefer to always view the website in English, please click here.
The dilemma with second homes is how to enjoy every comfort while we are there, without our electricity bill shooting up for the days we are away. The solution lies in calculating what capacity to contract based on how we plan to use the property, without running short of electricity or paying more than necessary. Here we explain how.
Think about the appliances you usually use at the same time in your second home, and you will know how much electrical capacity you should have.
Capacity is a cost that appears on your bill even when you are not at the property. It is what you pay to bring the energy you may need to your home. And whether you use it or not, it involves a fixed monthly charge that covers the supply infrastructure. Here are two recommendations to make sure you only pay what you need:
Because capacity is a different concept from the electricity you use during your holidays, the way you calculate it is also different:
Instead of basing your calculations on the days you are away relaxing, the formula is to base them on the electricity consumed by all your appliances if they run at the same time: electric heating, the hob and oven, lighting, the fridge, the television…
That way, by checking the power rating in watts (W) of each appliance, you will get the total amount you would need if you switched them all on together.
Assuming that electricity demand is lower in a holiday home than where you live the rest of the year is no guarantee of getting it right either. The required capacity may be lower, the same or even higher, depending on the case. And this holds true even if your annual electricity consumption is significantly lower.
For example, if you want your second home to feel like a 'home from home', switching on the air conditioning, oven, ceramic hob and other appliances at the same time may require a contracted capacity similar to that of your main home.
If, in addition, you have a swimming pool to enjoy in summer or an electric heating system replacing natural gas, as is the case in many remote properties, this peak electricity demand could exceed the capacity you have contracted in your main residence.
Leaving aside the lawnmower for the garden, the DIY workshop or, as so often happens, the days spent doing minor renovations when you pop down to your holiday home, we can sketch out a quick guide linking property size, appliance usage and what each capacity band covers, approximately:
|
Contracted capacity: |
Sizes and usage: |
Tips: |
|---|---|---|
|
2,3 kW and below |
Small property with lighting, fridge and small appliances |
This is a very limited capacity if you plan to use several appliances at the same time |
|
3,4 kW |
Medium-sized property where appliances are used one after another |
Be careful not to switch on the most powerful appliances at the same time: oven, heating and cooling, electric water heater… |
|
4,6 kW |
Medium-sized property with several appliances running at the same time |
This is a more standard capacity for peace of mind, but you should still avoid overlapping major consumption peaks. |
|
5,75 kW and above |
Large property with more demanding electrical equipment |
It is advisable to choose the right level to cover all peak demand, without overpaying |
This will allow you to compare how much capacity is supplied to your home and how much you will actually need at peak consumption times.
Although the rated power of your appliances does not mean they always run at full power, using it for your calculation will help guarantee you have enough electricity with a wider safety margin.
Here is an indicative example of the capacity that four of the most power-hungry appliances in a second home would require if running simultaneously at full output:
|
Appliance: |
Indicative power rating: |
Total in kW: |
|---|---|---|
|
Domestic hot water cylinder |
1.500 W |
1,5 kW |
|
Electric oven |
2.400 W |
+ 2,4 kW = 3,9 kW |
|
Washing machine |
1.700 W |
+ 1,7 kW = 5,6 kW |
|
Air conditioning |
1.200 W |
+ 1,2 kW = 6,8 kW |
According to the table, to switch on those four appliances at the same time with peace of mind, your contracted capacity should be around 6.8 kW.
If you want to find out the approximate demand of common household appliances, you can check it in this article.
For second homes that are only occupied for a few days a year, it may be worth lowering your capacity to save on the standing charge on your bills.
Bear in mind, however, that on the days you do visit, the amount of electricity you can use at once will be limited to what you have contracted. You will therefore need to keep an eye on how you use your appliances, trying not to run the highest-powered ones at the same time.
If your goal is to cut costs without having to think about what you switch on or off during your days off, here are a few tips that can help:
Significantly reducing your contracted capacity can bring direct savings, but it also poses a short- and long-term risk.
This is because, if you exceed your simultaneous consumption limit, your power control switch (ICP) will frequently trip (what used to be called 'blowing a fuse'). First of all, this affects your comfort, and it also subjects your appliances to conditions that, over time, reduce their lifespan and energy efficiency.
Capacity is a charge on your bill that recurs month after month. To calculate your potential savings from lowering it, simply compare how much you are paying now with how much you would pay with a lower capacity on your electricity tariff. Multiplied by 12 months, that will give you an idea of your annual savings.
Bear in mind that the standing charge is only one part of the total amount you pay on your bill. If you are considering switching tariff or supplier, rather than just changing your capacity, it is advisable to also check the price per kWh you use. That way, you will avoid losing the savings made on one part of your bill to a higher rate on the other.
Lowering your contracted capacity involves an administration fee, and the fee is usually higher if you need to increase it again later. Therefore, if your calculations across all bill items do not show clear savings, making the change may not be worth it.
Similarly, analysing all simultaneous consumption in your second home may point to savings that, in practice, would require paying close attention to times of day and which appliances you switch on. In that case, the decision will depend on how willing you are to change your consumption habits.
On time-of-use tariffs, the cost you pay for your contracted capacity varies between peak and off-peak hours.
On weekdays, from 8 am to 12 midnight, the price is higher. These are peak hours. However, during off-peak hours that price drops by nearly half, covering weekday nights, all day on bank holidays and all weekend.
This makes time-of-use pricing particularly attractive if you use your second home at weekends, as you will benefit from the cheaper capacity rate.
Depending on the type of tariff you have, you can choose one capacity limit for peak bands and a different one for off-peak bands.
Applied to your second home, this is an opportunity to combine savings on both capacity and energy consumed. For example, by contracting a lower capacity for the most expensive hours and a higher one for the cheapest time bands, when you can concentrate the home's electricity consumption.
Requesting a change to your contracted capacity from your distributor is straightforward, and involves no supply interruptions, building work or changes to your appliances. However, there are a few important points to bear in mind:
To process your request, you may be asked to provide the following information:
To increase your capacity, you will also be asked for your property's Electrical Installation Certificate (CIE). This is a mandatory document certifying the condition of your electrical installation, and must be checked to confirm that it can support a higher capacity or a change from single-phase to three-phase supply.
Reducing your electrical capacity is considerably cheaper than increasing it. If your Electrical Installation Certificate is valid and does not need renewing, the administration fee is €9.04 regardless of how many kW you reduce it by.
However, when increasing it you will have to pay €19.70 for each kW, plus the €9.04 administration fee and, if the change requires extending the capacity rights stated on your CIE, a further €17.37 per kW.
In both cases, the Electrical Installation Certificate can add a substantial extra cost. If it is more than 20 years old, an inspection by a certified electrician and subsequent official approval will be required. This can add another €150 or more to the cost, making it highly advisable to factor this into your savings calculations.
With a few exceptions set out in Royal Decree 88/2026, you are currently only allowed to make one capacity change every 12 months.
Applied to your second home, this means it is not possible to increase your capacity at the start of every holiday and lower it again for the rest of the year.
There are electricity tariffs specifically designed to suit second homes. At the same time, there are many others that could be ideal depending on how you usually enjoy your second property.
Making the right choice depends on combining capacity and prices per kWh consumed, along with the benefits and terms offered by each option. And choosing for a country house where you spend every weekend of the year is not the same as choosing for a beach flat that sits empty all winter.
The key is to tailor your tariff to your preferences and habits. And to save money while doing so, it is worth reviewing five of the tips we have covered in this article:
It depends on the appliances you have and how you use them. Capacity (kW) measures how much power can be supplied to the property simultaneously, so the number of days you visit matters less than your consumption habits.
2.3 kW can be enough for a property without high electricity demand, with few appliances and provided you avoid using them at the same time.
Yes, on time-of-use tariffs in the free market and on the regulated PVPC tariff.
Around €3 per month. Which adds up to a saving of approximately €36 per year. You can see the table of savings between capacity bands in this article.
No. You can only make one capacity change per year, whether to reduce it or increase it.
It is better to lower your capacity, as reconnecting the supply involves a high grid reconnection cost.
You don't need to adapt to Endesa's tariffs because they adapt to you. If you go to our catalogue you can compare the different tariffs for yourself. Or if you prefer, you can answer a few questions and we will take care of comparing all the different electricity and gas tariffs and then make a customised recommendation.
Spend a minute to find the product which best adapts to you:
Spend a minute to find the product which best adapts to you:
{{content.phone.text}}
{{content.phone.phoneText}}
{{content.form.text}}